ELECTRIC MOTOR DRYING OVEN , CURING OVEN FOR MOTORS
1.Introduction
The drying ovens are designed to improve the safety and working
effi-ciency of
motor, electrical appliances, winding dripping and drying, and it
can be compatible
with vacuum pressure impregnation equipment,vacuum impregnation
machine for
drying after vacuum impregnation treatment.
Welcome to check youtube link of the electric motor curing oven:
2. Main features:
2.1 Even temperature, high temperature coefficient;2.lt is
selectable in the case
of over-temperaturealarm, sound & light alarm,automatic recording
andpower-off
in case of abnormal conditions;
2.2 Quick temperature rise to meet the drying require-ments of
F-grade, H-grade
and C-grade motor andelectrical appliances;
2.3 Adopting reasonable heated-air circulating system;5.Adopting
superior
electric heating tube with smallarea load and long service life;
2.4 Adopting superior heat-preserving cotton, efficientheat
preservation almost
withoutsurface heatemission;
3.Technical parameter
Model | Working chamber (mm)(width*depth*height) | Woking lemperature ( ℃) |
Power voltage (V) | Power frequency (HZ) | Heating power (kw) | Average temperature (%) | Terperatlure ftctuaion ranme (℃) |
| HB-1 | 1200*1700*1000 | RT-200 | 3~380 | 50 | 18 | ±2.5 | ±1 |
| HB-2 | 1500*1600*1600 | RT-200 | 3~380 | 50 | 27 | ±2.5 | ±1 |
| HB-3 | 2000*2000*2000 | RT-200 | 3~380 | 50 | 45 | ±2.5 | ±1 |
| HB-4 | 2000*2500*2000 | RT-200 | 3~380 | 50 | 54 | ±2.5 | ±1 |
| HB-5 | 2000*3500*2000 | RT-200 | 3~380 | 50 | 63 | ±2.5 | ±1 |
| HB-6 | 2200*4000*2000 | RT-200 | 3~380 | 50 | 72 | ±2.5 | ±1 |
| HB-7 | 3000*5000*3000 | RT-200 | 3~380 | 50 | 97 | ±2.5 | ±1 |
4.What is difference between oven and dryer?
I differentiate between ovens and cabinet dryers based on the fact
that a dryer, by definition,
removes moisture. By contrast, an oven typically will elevate the
temperature of a product to
allow for a specific process such as curing or preheating to occur.
Wondery offers high performance
drying oven for electric motors, through which such a complex item
can be effective dried, a process
which will make it stronger and sturdier. The dehydration process
happens at a rapid pace, enabling
many such items to be dried up at the same time and it is done with
the highest precision. The drying
oven for electric motors work with the vacuum impregnation
equipment. It is of curing purpose to increase
the insulation performance of the electric motors.
Picture of Vacuum Impregnation Process for Motors:
